MIG layer winding machine

CO2 WELDING WIRE DRAWING(PRODUCTION) MAHCINE LINE 

(5000T YEARLY-12 HOURS ONE SHIFT,TWO SHIFTS)

1-ROD WIRE PRETREATMENT LINE

2-LZ560 WELDING WIRE DRAWING MCHINE

3-FINE WELDING Wire Drawing Machine LZ400

4-COPPER COATING MACHINE LINE

5-PRECISION Layer Winding Machine(MIG CO2 Layer Rewinding Machine)

Wire surface pretreatment line

1. Equipment comprising and technical requirement

1)pay-off machine：with 2.5T wire coil loading, wire confusion EMG stop.

2)YCX08 non acid descaler machine, steel structure, full closed no pollution. 4 shell (shell wheel Ф140mm) that make steel wire bending, omni-directional 360 ° shell derusting effect is good. total power 12KW, four derusting the diameter 420mm, the brushed steel brush the wire for friction derusting, normal use of certain time (as per the derusting effect) adjust rust steel brush, adjust once per round forwards 5mm in steel brush, the speed of the machine matches with speed of drawing machine

3)Electrolytic pickling machine:the electrolytic pickling technique is adopted to clean up the residual oxidation skin and rust on wire surface. Via water washing and dry blowing to ensure the wire surface cleaning up before enter the boron coating technique. PP plate (thickness 15mm), channel body length 6.8 meters. Up and down channel structure. The positive and negative plates are insolated each other, which are arranged on up channel (leading thickness 10mm). The rectified console is 0~500A and 0~12V. Equipped with acid liquid cycle pump.

4)Heating water channel unit： steam or electric heating is used, with auto temp. control unit, with cyclic pump. The channel body length is 1.5 meter, enclosed 40mm thickness heat preservation cotton surrounding.  

5)Boron coating unit:：steam or electric heating is adopted with auto temp. controller. There is air blowing nozzle. The channel body length is over 4.5 meters, with cyclic pump.

6)high frequency induction dryer, energy conservation, the dryer effect is better, and save the space.

In metal processing, wire drawing machine equipment is a common type. In the past, DC generator sets (F-D systems) were generally used to accomplish this. With the advancement of technology and the popularization of frequency converters, frequency control has been widely used in wire drawing machine equipment. PLC can be used to complete functions such as drawing type setting, active operation, production process control, real-time closed-loop control, and active meter counting.