steel wire take up machinery

SG630 take-up machine: [1] , using active take-up technology, constant tension discharge, frequency conversion speed regulation, motor power 5.5 kw. The pneumatic top is equipped with i-wheel, pneumatic brake mechanism and pressure loss protection device. [3] , the fuselage adopts frame structure, the whole boring processing, the work stability rigidity is good. [4] , using GP40 optical bar wiring device, can flexibly adjust the width, stroke and pitch.

We are manuacturers for SG take up coiler machine 

Every year we can offer more than 100 set take up machine.

And the wire take up machine is one of our most important machines 

Wire take up coiler machine 

Spool Take Up Coiler Machine

main technical indicators Mig Welding Wire Production Machine Solid Core Welding Wire Drawing Machines

Due to the fact that the stability of the system largely depends on the role of PID, it is necessary to comprehensively consider the setting of its parameters, including low speed, high speed, rising speed, and falling speed. In addition, differential restriction needs to be involved in this system. After optimizing the parameter values of this system, the speed of 600 m/min during equipment debugging was very stable, completely solving the problem of instability of the original synchronous board at high speeds (only able to drive up to 300 m/min). The Wire Drawing Machine equipment has been tested under various working conditions, and its performance is the same as that of imported DC drives. The equipment efficiency is 90-95%, and the power saving rate is about 40%. Moreover, the electrical equipment configuration in this system is simple, with clear logic, and significantly reduced costs compared to the original. It is indeed a very excellent cost-effectiveness.

In metal processing, wire drawing machine equipment is a common type. In the past, DC generator sets (F-D systems) were generally used to accomplish this. With the advancement of technology and the popularization of frequency converters, frequency control has been widely used in wire drawing machine equipment. PLC can be used to complete functions such as drawing type setting, active operation, production process control, real-time closed-loop control, and active meter counting.

Our products are wire drawing machine,Layer Winding Machine,flux cored wire drawing machinery,including flux cored welding wire forming machine,MIG CO2 welding wire drawing machine,drum packing machine,pay off and take up machine,butt welding machine,pointing machine copper coating machine and so on.