water tank wire drawing equipment

Construction characteristics and performance parameter for wet drawing machine(water tank Wire Drawing Machine)

1. Structural characteristics of Wet Type Wire Drawing Machine 

(1) Power control: The main motor is controlled by a frequency converter for step-less speed regulation, which can be adjusted arbitrarily. The computer LCD panel displays the current main engine extension speed.

The winding motor is equipped with a separate frequency converter, which drives precision resistance through the rotation of the tension rod. The signal of resistance value change is automatically calculated under the control of the PC board. The command is given to the winding frequency converter to immediately adjust the motor speed to keep the tension rod stable and adjust the optimal tension to maintain even winding tension.

(2) Extension method: Horizontal four axis, staggered front and rear tower wheels.

(3) Transmission mode: All machines are driven by synchronous belts.

(4) Automatic shutdown: automatically stop at the meter, and protect the brake when the exit mold is broken.

(5) Using special high-quality products:

The surface of the A wire drawing machine is sprayed with paint for beautification treatment.

B bearings are all made of high-precision bearings.

C-factory brand high-efficiency transmission synchronous belt with permanent anti-static design.

High quality series motors from domestic first tier manufacturers.

2. Performance parameters

(1) Input range: Ø 2.2-2.0mm

(2) Output range: Ø 1.0/0.8/0.6/0.5mm

(3) Design speed: maximum 150 meters/minute

(4) Maximum usable eye module: 18 (to be provided by the buyer)

(5) Eye mold outer center size: Ø 30mm x 15mm

(6) Mechanical reduction rate: 1.159, finished product 1.1

(7) Main motor: 30kW

(8) Coiling motor: 4Kw

(9) Coiling outer diameter: 400 I-shaped wheels

(10) Brake braking: pneumatic brake

2、 Construction and function of the machine:

1. Host construction:

(1) Material: Q235 (high-quality steel plate welding)

(2) Processing: The machine body is formed by high current welding, annealed to eliminate internal stress, and then completed by precision boring machine with integrated reaming, which has the characteristics of no deformation and high precision.

2. Drive shaft:

(1) Material: High wear-resistant mold steel (quenched and tempered)

(2) Processing: The shaft core is subjected to quenching and tempering treatment to eliminate internal stress and achieve good comprehensive mechanical properties. The mating parts are finely ground to ensure the coaxiality and flatness of the shaft core.

3. Power transmission:

Using synchronous belts to drive the rotational speed between each extension wheel axle one by one. The winding shaft is driven by another motor separately, matched with an independent frequency converter, and feedback information is provided to the frequency converter by the tension rod buffer device, achieving continuous adjustment of the winding speed.

We can make wire drawing machine,butt welding machine,pointing machine,Flux Cored Wire Forming Machine,drum packing machine,Layer Winding Machine.